|
It's very
difficult to paint the front baffle board. It has both good
and bad effects to the sound quality by its means. We would
recommend you purchase SSC coated front baffle boards from
that point of view, too. They painted with Super
Sound Coating compound (SSC) in thrice. Please specify the baffle
aperture diameter. |
P/No. |
Description SSC coated front baffle
boards |
Price
(pair) |
SSC-FB-141S |
for
MM-141S/141ST |
JPY8,300
|
SSC-FB-151S |
for
MM-151S/151ST |
SSC-FB-161S |
for
MM-161S/161ST |
SSC-FB-141 |
for MM-141 |
JPY9,400
|
SSC-FB-151 |
for MM-151 |
SSC-FB-161 |
for MM-161 |
JPY10,400
|
SSC-FB-171 |
for MM-171 |
SSC-FB-151T |
for MM-151T |
JPY12,500
|
SSC-FB-161T |
for MM-161T |
SSC-FB-171T |
for MM-171T |
JPY14,600
|
SSC-FB-181T |
for MM-181T |
SSC-FB-191T |
for
MM-191T |
If you are owner of MM-141 or MM-151, you can
enjoy the sound of reverse back loaded system just by
replacing to the front baffle boards for reverse
BH. If you will order MM-141 or MM-151
with the front baffle boards for reverse BH, you can
enjoy both backloaded horn and reverse
one. You can replacing the front baffle
boards depending on the music. |
|
|
Description front baffle boards
w/ dedicated cables for |
Price (pair) |
MM-141 Reverse Backloaded
System |
JPY8,300 |
MM-151 Reverse Backloaded
System |
JPY9,400 |
Working Principle of Reverse
System |
Diaphragm
of speaker driver is small amplitude vibration in
mid- high-tone range. Therefore, it doesn't get the
blowback from driver. But the driver diaphragm is
large amplitude vibration in low-tone range, so it will get
an adequate blowback from driver. As a
result, its driver plays the high responsive and high
linearity sound oneself from low to high-tone
range. If it compared to automobile, backloaded
horn is Turbo engine and reverse one is well-honed
Formula One (F1) engine. This is not comparative merits and
demerits of backloaded horn and reverse backloaded
horn. This is a matter of taste. Visitors
contrasted backloaded horn sound with
reverse one at The 9th Vacuum Tube Audio Fair
in Akihabara,Tokyo. About 20% of the visitors liked
reverse backloaded horn sound better than it. Better
backloaded horn than reverse one about low-tone range,
but better reverse backloaded horn than it about the sound
localization and exhilaration. MM exponential horn allowed
the reverse backloaded horn system. The reverse
backloaded horn system will natural attenuate the blowback
of drivers by taper-shaped horns. It has infinite
baffle-like utility. Cone paper of driver cadences in
response to a weak signal in mid- high-tone range in
case of the reverse backloaded horn system because it
doesn't get the blowback from driver. Furthermore, the
forward sound is insusceptible to its blowback sound. So,
the system has better volume feeling and texture
than closed system, but the system is inferior to
backloaded horn system in volume
feeling. |
Replacing Method to Reverse
System |
Step
01:
Turn MM-141/MM-151 upside down. Loosen
the nearest 3 nuts with a wrench, and remove the
front baffle board for the back loaded horn
system. |
|
|
Step 02:
Pull the dedicated cable from the horn
opening. Connect the dedicated cable to the front baffle
board for the reverse back loaded horn system. It
doesn't need any
absorbing materials. |
Step 03:
Tighten the nearest 3 nuts with a
wrench. You can enjoy both back loaded horn
and reverse one from now. |
|
JPY7,000/pair |
Material Frame:/ MDF Net:/ Jersey cloth Size ƒÓ141(ID)XƒÓ180(OD)X15mm(T) we'll be able to give you at a lower price if
you order with diy horn speakers. |
Feature -Apply to 10 to 13cm driver. -Simply fixturable speaker grill, and
simplify desorption by magnet. -Doesn't have a negative
effect on the sound quality compared to made of
perforated metal. |
Fixing Method to Front
Baffle |
|
|
Step
01: |
Adhesion taped round metallic plate is stuck
to a magnet by the magnetic force. |
Peel the release paper of four round metallic
plates. |
|
|
Step
02: |
Push
the grill frame against the front baffle lightly to the
position of the driver. |
Four round metallic plates adhere to the front
baffle from the grill frame. |
|
Step
03: |
Magnetic-backed speaker grill is held in a stable
position by the magnetic force. It is weak, so it has
absolutely no impact on the sound quality. | |
Thank you for
coming to the sound reproducing world. Copyright © 2009-2014
TelaWorks Corporation, All Right
Reserved. | |